Hi all, I am finally getting into biking, and have just got my CBT and first bike. KTM Duke 125.
Couple of questions though so far, and would appreciate some advce.
I really struggle to change gears as I cannot get my boot under the gear lever. I also had the issue when doing my CBT, where I rode two other bikes. Not sure if it's me, or my boots. They are bulky and rigid as is above ankle. Looking online, not many people seem to have the issue. note: I have no issues with understanding the gears, it's just those down shifts and neutral.
And secondly, I struggle to get my leg over the seat to get on and off. I simply struggle to get it high enough. I am trying to avoid using the peg. I am not short, at 5"10. So why do I struggle when shorter people seem to find it easy.
Thanks In Advance. Really need some guidance here. As want to get good enough to get my das test done.
Hi UkWizard Riding jeans or trousers too tight, try raising the gear leaver 1 spline it will give you more room to get your toe under the leaver. hope that helps
1st gears, Try different footwear, ever if it's just sitting on the bike wearing trainers. If all is ok, get new boots or wear the boots around the house. going up and down stairs to break them in.
2nd getting your leg over. It's not about how tall you are, it's about your inner leg length. To make the seat height a little lower, turn the bars to the right, this will make the bike lean a little more to the left. With myself being short in the leg, If I have something on the back seat. I tend to cock my right leg up at a 90 degree angle and hop towards the bike until my arse is on the seat. Not very dignified, but it works.
Getting on, Ragnar is correct, but also lean forwards, and as low as you can with your upper body, as you throw your leg up. You can of course use the off-road style too, and mount using your footrest. YouTube is worth a search.
From what I read the KTM has an 800mm seat height which is pretty low (mine is 835 and I'm old and fat with a wonky knee but 6ft ) so go with the bent knee technique. With regards to the gear selector I've read that the peg lowering kits can create more space under the gear selector so that might be worth investigating 🤔
However, when I crushed my ankle a couple of years ago I was convinced that my gear selector was damaged as I couldn't change up through the gears... It turned out to be that my ankle wasn't flexing
Not sure how old you are UkWizard, but as we get older the Aductor muscles around the hips tighten up, especially if lifestyles become more sedentary. Might be an idea to try some physio to improve flexibility. Otherwise just use the peg and step over.
![gear changing issues & getting leg over seat - Forums [Biker Match]](/images/backgrounds/strips/8mobileLQ.jpg)
![gear changing issues & getting leg over seat - Forums [Biker Match]](/images/backgrounds/strips/8desktopLQ.jpg)
